HOME LIGHTNING STRIKES ARE COSTLY

Home Lightning Strikes Are Costly

Home Lightning Strikes Are Costly

Blog Article

If you are thinking of selling your home, there are a number of things you can do to improve the "showability" of your home. But first, let's look at your home through the eyes of the buyer.

As a general rule, you will not be able to get a crack front window repair if it is more than 6 inches long. If your problem is a chip instead of a crack, the chip should not be larger than a quarter. Keep in mind that these rules are not hard and fast, always check with a local professional.



You will next see what is called a parting bead which is a small trim piece about 1/2 inch by 3/4 inch in size partially buried in the window casing. It separates the two sashes. I recommend replacing these and you will find they are very difficult to remove without splintering them. If you are repairing the window and not installing new side tracks you must replace the parting beads. The upper sash and weight removal is the same as the bottom. Don't forget to open the sash pockets at the bottom of the upper sash tracks as well to allow sash weight removals. With sash, weights, nails and pulleys removed, clean all loose paint from remaining surfaces and if your sure it is not lead paint, some sanding may be in order as well.

PVC and soft top convertibles must be very well inspected for holes, cracks and leaks. Close the roof and turn the windshield repair near me up. Look from the inside out. Light points indicate holes in the material. You could also hose the care down at the car wash. Choose the option without wax or shampoo. Suppose the roof is a sieve, then at least the interior cleaned! Avoid this!

Clean up the front yard. Mow the grass. In the winter, shovel the driveway and the sidewalk. In the summer, add some flower pots. Wash the windows windshield chip repair and window screens. Repaint the front steps.

If you are using a system repair disc, boot the PC with that. Otherwise, after your PC has finished its BIOS sequence, hold down the F8 key. Choose Repair Your Computer from the Advanced Boot Options screen (below) and tap Enter.

After removing the film, use a hard object that won't scratch the glass to remove excess resin. Something like a plastic scraper or piece of wood, such as a popsicle stick should do the trick.

Report this page